WAR-SCY-11 = Sevigny Carry 1 lamp rear (.150 wide notch) with tritium front (.125 WIDE)
SEVIGNY CARRY SIGHTS
- WE TOOK A GREAT COMPETITION SIGHT AND ROUNDED THE BACK OUTER EDGES, MADE IT SNAG FREE AND PRODUCED A GREAT CARRY SIGHT. ALL THE FEATURES THAT GIVE THE COMPETITIVE SHOOTER AN ADVANTAGE ARE NOW USED IN THE SEVIGNY CARRY SIGHT TO GIVE THE DEFENSIVE SHOOTER AND LAW ENFORCEMENT PROFESSIONAL THE SAME SHOOTING ADVANTAGES.
CLEAN REAR BLADE
- OUR REAR SIGHTS ARE VOID OF DISTRACTING SERRATIONS, UNDER CUTS, PAINTED LINES AND ODD ANGLES THAT DISTRACT THE SHOOTERS EYE FROM THE FRONT SIGHT.
- ALL WARREN AND SEVIGNY REAR SIGHTS ARE BASED ON THE PRINCIPLE THAT CLUTTERED, BUSY REAR BLADES ARE DISTRACTING.
- THE REAR SURFACE ON THE WARREN AND SEVIGNY SIGHTS ARE ANGLED SLIGHTLY BACK TOWARDS THE SHOOTER TO ELIMINATE GLARE. ALSO, THE FRONT OF THE REAR SIGHTS HAVE A LARGE RADIUSED CUT THAT ALLOWS FOR ONE HANDED SLIDE CYCLE DRILLS.
WIDE NOTCH
- THE WIDE NOTCH AT .130, ALLOWS FOR AN AMPLE AMOUNT OF LIGHT ON BOTH SIDES OF THE FRONT SIGHT. THIS HELPS THE SHOOTER TO SEE THE FRONT SIGHT ON THE EXACT SPOT (FOCAL POINT) WHERE THEY WANT THE SHOT TO BE PLACED. WITH PLENTY OF LIGHT AROUND OUR CARRY AND TRITIUM FRONT SIGHTS (AT .115 WIDE) THE SHOOTER CAN EASILY READ WHEN THE FRONT SIGHT IS ON THE TARGET, HARD COVER OR A NON-THREAT.
- SIGHTS THAT HAVE TOO NARROW OF A NOTCH WITH A WIDE FRONT SIGHT MAKES IN ALMOST IMPOSSIBLE TO DISCRIMINATE BETWEEN THE FRONT SIGHT AND WHERE IT IS ON THE TARGET.
- THE WIDE NOTCH ALSO ENHANCES THE SHOOTERS ABILITY TO CALL THE SHOT. (CALLING THE SHOT: AFTER THE SHOT IS TAKEN, WITH THE ABILITY TO EASILY SEE THE FRONT SIGHT, THE SHOOTER CAN WATCH THE FRONT SIGHT LIFT OFF THE TARGET DURING THE RECOIL PHASE OF THE SHOT AND THEN FOLLOW IT BACK DOWN AND QUICKLY ALIGN IT WITH IN THE REAR NOTCH DURING THE RECOVERY PHASE OF THE SHOT.)
- ALL THESE FEATURES COMBINE TO GIVE THE DEFENSIVE SHOOTER, THE COMPETITIVE SHOOTER AND THE LAW ENFORCEMENT PROFESSIONAL AN ADVANTAGE FOR FAST SIGHT ACQUISITION, TARGET DISCRIMINATION, SHOT PLACEMENT AND FAST FOLLOW UP SHOTS.
FRONT SIGHTS
- SCOTT AND DAVE READILY AGREED WITH THE DIMENSIONS FOR THE FRONT SIGHTS. ALL PLAIN CARRY AND TRITIUM FRONT SIGHTS ARE .125 WIDE. THE PLAIN CARRY SIGHTS ARE SERRATED WITH 9O LPI. THE TRITIUM FRONT SIGHTS HAVE A GREEN LAMP ENHANCED BY A WHITE RING.
- ALL PLAIN COMPETITION AND FIBER OPTIC FRONT SIGHTS ARE .115 WIDE. THE PLAIN COMPETITION SIGHTS ARE SERRATED WITH 90 LPI. THE FIBER OPTIC FRONTS ARE ALSO SERRATED AND USE A .040 DIAMETER ROD. RED AND GREEN RODS ARE SUPPLIED.
- FOR MOST GLOCKS OUR STANDARD FRONT SIGHT HEIGHT AT .215 WORKS GREAT. FOR THE LONG SLIDE GLOCKS, i.e. 20s, 21s, 34s, 35s the .245 TALL FRONTS WORK GREAT.
TRITIUM SETS
- WE ONLY USE TRIJICON LAMPS WITH OUR SIGHTS. THE FRONT SIGHT HAS A LARGE GREEN LAMP WITH A WHITE RING AROUND IT. THIS HELPS THE SHOOTER TO QUICKLY FIND THE FRONT SIGHT IN ALL LIGHTING CONDITIONS. THE REAR SIGHTS USE A SLIGHTLY SMALLER YELLOW/AMBER LAMP WITH NO PAINTED OUTLINES. THIS IS DONE FOR SEVERAL REASONS. WITH TWO DIFFERENT COLORED LAMPS AND DIFFERENT DIAMETERS, THE SHOOTER ALWAYS KNOWS THAT THE LARGE GREEN LAMP IS THE FRONT SIGHT AND THE SMALLER YELLOW/AMBER LAMPS ARE THE REAR SIGHT. ALSO, WHEN SHOOTING IN WELL LIT CONDITIONS, THE SMALLER LAMPS, WITH NO PAINTED OUTLINES, OF THE REAR SIGHT ARE NOT DISTRACTING.
|
|
Shopping Cart - 0 item(s)
